The new DD120MR & DD120ML are three-phase cutting unit for cutting textile, technical fabrics and composite material. These models are designed based on the latest Rasor DirectDrive technology having the knife installed on the same axis of the motor. DD120 machines have no coupling gear which means no maintenance (i.e. the lubrication with grease) so no-stop 24h/day production process. The knife can reach a speed of 2600 RPM so this tool perfectly suits the high speed no-stop cutting process. The new special building geometry “Monster” style totally avoid the trouble on material winding fiber behind the knife, which problem is normally faced for composite material cut. The cutting system combination of knife and counterblade (now Titanium coated) assure a precise and sharp cut without scraps. The induction three-phase motor is balanced and silenced with no maintenance needed guaranteeing reliability for life. The knife is 8-edges 120 mm diameter and allows to reach a cutting thickness of 50 mm even as multi-layers. DD120 is especially studied for the transfersal and no-stop cut and it is arranged with a anchor flange easy to be fitted on fixed or automatic stirrup. The aluminium Teflon® coated base reduce the friction between the foot and the material and allow the easy forward movement even for an installation on sliding rails. The push button sharpening stone allows the sharpening of the knife edge to be done in less than 10 seconds without removing the knife.
< Back to news index